Find the differential equation corresponding to the transfer function G (s) = 2s + 4 s 3 + 2s 2 + 4s + 5

150 lb of force is applied at the end of a shaft that is 2 1/2 ft long. It is applied at an angle of 90° to the lever. How much torque is produced? If the shaft is rotating at 350 rpm, what is the power?

Sherry recently designed an electric paper shredder that can shred 20 sheets of paper at a time. All 20 sheets are shred in 5 seconds, and the shredder can store the shreddings of 200 sheets before it needs to be emptied.

A specimen has circular cross-sectional area with initial diameter d = 26 mm and a gauge length Lo = 200 mm. A force P = 127 kN elongates the specimen by delta = 3 x 10^-1 mm.

Your coworker was impressed with the efficiency you showed in the previous problem and would like to apply your methods to a project at a site with a sandy clay profile.

What's a disadvantage of highest MERV-rated filters? 1) the pressure drop across high MERV filters is less. 2) high MERV filters require at least a 240 V power supply. 3) the pressure drop across high MERV filters is significant.

A hydraulic power unit is sometimes referred to as a?

8.21 In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter.

Which of the following can improve your car's gas mileage? A. Equipment racks B. Cargo carriers C. Sports team flags D. Car aerodynamics

Which of the following describes a logic bomb? a rogue piece of code in a system activates on a certain date a piece of code replaces the boot instructions the cookie tracker is exploited to note your browsing habits a piece of code hidden in a

Supercharging is the process of (a) Supplying the intake of an engine with air at a density greater than the density of the surrounding atmosphere (b) providing forced cooling air (e) injecting excess fuel for raising more load (d) supplying