Engineering

17 June, 06:02

A good rule of thumb in hazardous conditions is to?

A. Speed up and get off the road quicker.

B. counter steer your way to your destination, so you maintain control.

C. have your hazard lights on, so vehicles on all sides can see you.

D. Slow down and increase your following distance to five seconds or more.

+4

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “A good rule of thumb in hazardous conditions is to? A. Speed up and get off the road quicker. B. counter steer your way to your ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

The pads are 200mm long, 150 mm wide and thickness equal to 12mm. 1 - Determine the average shear strain in the rubber if the force P = 15 kN and the shear modulus for the rubber is G = 830 kPa.

Determine the direct runoff and streamflow given the following unit hydrograph. The rainfall is collected at 4-hour intervals and is measured as follows: 2, 3, and 5 cm. The rainfall infiltration rate is 0.3 cm/hr. The baseflow is 22 m3/s.

How can you avoid aliasing error during sampling when converting an analog signal?

The high-pressure air system at OSU's Aerospace Research Center is fed by a set of two cylindrical tanks. Each tank has an outer height of 50 ft and an outer diameter of 4.6 ft. The tanks are made of 0.

What type of cable communicates binary data by changing the voltage between two ranges?

New Questions in Engineering

Critically analyse a common engineered product in terms of the materials used, the processes required to manufacture the product, and the historical context of the material leading to its present form

Given an unsorted array of distinct positive integers A[1 ... n] in the range between 1 and 10000 and an integer i in the same range. Here n can be arbitrary large. You want to find out whether there are 2 elements of the array that add up to i.

A hydraulic power unit is sometimes referred to as a?

8.21 In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter.

Which of the following can improve your car's gas mileage? A. Equipment racks B. Cargo carriers C. Sports team flags D. Car aerodynamics