Milk has a density of as much as 64.6 lb/ft3. What is the gage pressure at the bottom of the straw 6.1 inches deep in the milk? Give your answer in units of psi. (Do not put units in the blank.)

Assuming the torsional yield strength of a compression spring is 0.43Sut and the maximum shear stress is equal to 434MPa. What is the factor of safety if the spring is a music wire (A=2170MPa and m=0.146) with a wire diameter of 4mm?

Annie has collected several items from around her house. She is using these objects to investigate which objects are attracted to magnets and which ones are not.

Were is carbon monoxide located in a car A. the exhaust gases with loud mufflers only B. all exhaust gases from all gasoline engines C. the exhaust gases of poorly maintained vehicles only D. the exhaust gases of older vehicles only

Poses the greatest risk to workers because it is more common in more easily transmitted in other blood-borne diseases

For laminar flow over a hot flat plate, the local heat transfer coefficient decreases with distance because (select all that are correct): A. The velocities near the plate are decreasing. B.

Payment to beneficiaries who were named by the insured person

The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.