Ask Question
EngineeringEngineering
18 September, 13:29

Each of the following is a function of an automotive transmission except: A. Allows the drive wheels to turn different speeds for cornering. B. Provides a gear ratio to increase engine torque. C. Provides a gear ratio to increase engine speed D. Provides a means to reverse the rotation of the output shaft

+3
Answers (1)
  1. 18 September, 13:33
    0
    A. Allows the drive wheels to turn speeds for cornering.

    Explanation:

    A transmission system transferred the engine to rear and front wheels. Some vehicle are only rear wheel driving but some high loaded vehicle are both rear and front wheel driving. mainly transmission system is a collection of gear arrangement.

    Transmission system changes the speed and torque of the vehicle according to the speed and torque of the engine.

    The differential is used to change the speed of wheels at cornering.

    So in the above question all are correct for automotive transmission system except A.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Each of the following is a function of an automotive transmission except: A. Allows the drive wheels to turn different speeds for ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
What are the major limitations of melt spinning method? a) - good for limited alloys and limited shapes b) - good for limited shapes, high cost c) - good for limited thickness and limited shapes d) - high cost, high energy consumption
Answers (1)
We are used to connect the external devices and power supply to a computer. My anagram is torps
Answers (1)
In Engineering, what is a shoulder on a bridge?
Answers (1)
Pure ethanol has an octane rating of about 113. E85, Which contains 35 percent oxygen by weight, has an octane rating of about
Answers (1)
Employers are not required to keep a record of an employee who has the flu. a. True b. False
Answers (1)
New Questions in Engineering
Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication
Answers (1)
According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.
Answers (2)
A gas flows through a one-inlet, one-exit control volume operating at steady state. Heat transfer at the rate takes place only at a location on the boundary where the temperature is Tb.
Answers (1)
An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.
Answers (1)
The convection heat transfer coefficient for a clothed person standing in moving air is expressed as h 5 14.8V0.69 for 0.15, V, 1.5 m/s, where V is the air velocity. For a person with a body surface area of 1.
Answers (1)
Home » Engineering » Each of the following is a function of an automotive transmission except: A. Allows the drive wheels to turn different speeds for cornering. B. Provides a gear ratio to increase engine torque. C. Provides a gear ratio to increase engine speed D.
Sign Up Forgot Password?