Ask Question
EngineeringEngineering
15 January, 09:41

Ceramics are inorganic materials mainly consist of hydrocarbons. a) - True b) - False

+3
Answers (1)
  1. 15 January, 10:08
    0
    Answer: False

    Explanation: Ceramics are the inorganic materials which are mainly composed by mixing the components like clay, earthy materials, powders and inclusion of water also. They are usually used for making of tiles, bricks, pottery things etc. The ceramic products are have pores and are hard in nature. It is mostly given shape in the desired form and then heated under a high temperature to give a permanent shape.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Ceramics are inorganic materials mainly consist of hydrocarbons. a) - True b) - False ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
A composite wall is to be used to insulate a freezer chamber at - 350C. Two insulating materials are to be used with conductivities of 0.04 W/mK and 0.1 W/mK. If the outside surface temperature of the inner layer (0.
Answers (1)
g Write a program that takes in a positive integer as input, and outputs a string of 1's and 0's representing the integer in binary. For an integer x, the algorithm is:
Answers (1)
The 10mm diameter rod is made of Kevlar 49. Determine the change in length and the change in diameter. Lenght of the rod = 100mm Therefore there are two 80KN forces are pulling the rod from both sides.
Answers (1)
Wheel diameter = 150 mm, and infeed = 0.06 mm in a surface grinding operation. Wheel speed = 1600 m/min, work speed = 0.30 m/s, and crossfeed = 5 mm. The number of active grits per area of wheel surface = 50 grits/cm2.
Answers (1)
1. Nitrogen at an initial state of 300 K, 150 kPa, and 0.2 m3 is compressed slowly in an isothermal process to a final pressure of 800 kPa. Determine the work done during this process.
Answers (1)
New Questions in Engineering
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)
Home » Engineering » Ceramics are inorganic materials mainly consist of hydrocarbons. a) - True b) - False
Sign Up Forgot Password?