What does product integration refer to in an advanced manufacturing setting?
A.
creating improved solutions by utilizing recycled wastes as raw materials
B.
improving the refining process to produce better raw materials
C.
combining primary and secondary processes to provide higher efficiency
D.
bundling software with components to create a complete product
E.
waste management that integrates manufacturing and environment responsibility
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “What does product integration refer to in an advanced manufacturing setting? A. creating improved solutions by utilizing recycled wastes as ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
A 80 kHz sinusoidal voltage has zero phase angle and a maximum amplitude of 25 mV. When this voltage is applied across the terminals of a capacitor, the resulting steady-state current has a maximum amplitude of 628.32 μA.
Answers (1)
Observe the following pairs of binary numbers: 00011111 and 00100000 00111111 and 01000000 01111111 and 10000000 Describe the general relationships between these pairs of numbers in terms of: Decimal values. Powers of 2. Number of bits required.
Answers (1)
Problem 6.3 7-20 Consider a hot automotive engine, which can be approximated as a 0.5-m-high, 0.40-m-wide, and 0.8-m-long rectangular block. The bottom surface of the block is at a temperature of 80°C and has an emissivity of 0.95.
Answers (1)
Turn the motor around in the circuit. What happens?
Answers (1)
What are the characteristics of carbon fibre?
Answers (1)
New Questions in Engineering
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers
Answers (1)