Convert dimension 1'-2" to decimal feet

An aluminum rod with a gauge length of 1.18 m undergoes thermal expansion from 20 oC to 92 oC. The thermal expansion coefficient and elastic modulus of aluminum are 22.2 * 10-6 K - 1 and 68.9 GPa respectively

Learning the key concepts of each approach is essential to successful management of a project. What type of unpredictability is described when a team is charged with designing the next generation of electronic car may know they are to build a car

Pouring molten aluminum into a mold and allowing it to cool forms?

Ai r is compressed by a 30-kW compressor from P1 to P2. The air t emperature i s maintained constant at 25oC during thi s process as a result of heat t ransfer to the surroundings medium at 17oC. Determine the rate of entropy change of the air.

Technician A says that after replacing a power steering hose, the system should be flushed, refilled, and bled. Technician B says to replace any O-rings when installing a new hose. Who is correct? A. Technician A only B. Technician B only C.

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False