I "powered up" my circuit by connecting it to the live terminals of a power supply. I then measured the resistance of a resistor in my circuit and wound up with an unexpected value. I therefore concluded that the resistor was out of tolerance, so I removed it from the circuit. Did I do something wrong? Was the resistor really out of tolerance?
Answers (2)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “I "powered up" my circuit by connecting it to the live terminals of a power supply. I then measured the resistance of a resistor in my ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
g Assume a base, Base has a derived class, Sub ... Also, assume a method called methodX () is defined in Base and overridden in Sub.
Answers (1)
Various factors to be considered in deciding the factor of safety?
Answers (1)
Pam Jones worked for 41 years at the same company and had positive performance ratings and personnel records. She needed a calculator for work which she purchased with her own money but was not reimbursed because she lost the receipt.
Answers (1)
Which of the following terms describes the amount of time that a vehicle can be operated with its headlights on before battery voltage drops to 10.5V? Group of answer choices ampere-hours rating wattage reserve capacity cold cranking amps
Answers (1)
Liquid water enters an adiabatic piping system at 15°C at a rate of 8kg/s. If the water temperature rises by 0.2°C during flow due to friction, the rate of entropy generation in the pipe is?
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)