Ask Question
EngineeringEngineering
18 June, 21:18

In 1903, Aegidius Elling of Norway designed and built an 11-hp gas turbine that used steam injection between the combustion chamber and the turbine to cool the combustion gases to a safe temperature for the materials available at the time. Currently, there are several gas-turbine power plants that use steam injection. Does steam injection improve the thermal efficiency of a gas-turbine power plant?

+3
Answers (1)
  1. 18 June, 21:23
    0
    Steam injection increases the mass flow rate of steam in the turbine. As a result, the power output from the turbine also increases.

    Explanation:

    Steam injection increases the mass flow rate of steam in the turbine. As a result, the power output from the turbine also increases.

    Thermal efficiency increases as work output increases but heat addition remains constant. The process of steam injection is similar to the regeneration process. The exhaust gases which are coming from the exit of the turbine can be used to obtain steam.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “In 1903, Aegidius Elling of Norway designed and built an 11-hp gas turbine that used steam injection between the combustion chamber and the ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Draw a temperature-entropy (T-s) diagram for the power cycle. Indicate the above-mentioned major components on the diagram.
Answers (1)
Consider each statement below and determine which are correct concerning dietary fiber. Select all that apply. View Available Hint (s) Select all that apply.
Answers (2)
Refrigerant-134a is throttled from the saturated liquid state at 700 kPa to a pressure of 157.38 kPa. Determine the temperature drop during this process and the final specific volume of the refrigerant. The inlet enthalpy of R-134a is 88.
Answers (1)
Which of the following is least likely to affect the convection heat transfer coefficient? a) - Thermal conductivity of the fluid b) - Geometry of the solid body c) - The roughness of the solid surface d) - Type of fluid motion (laminar or
Answers (1)
Which two word pairs to locate the word vicious in the dictionary
Answers (1)
New Questions in Engineering
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers
Answers (1)
Home » Engineering » In 1903, Aegidius Elling of Norway designed and built an 11-hp gas turbine that used steam injection between the combustion chamber and the turbine to cool the combustion gases to a safe temperature for the materials available at the time.
Sign Up Forgot Password?