6. Employers can implement updated

to improve employee safety.

A)

Administrative processes

B)

Engineering controls

C)

Work practices

D)

All of the above

Considering a closed, stationary, rigid container with certain gas inside, the total mass of the gas is 2 kg, and a heating process goes from state 1 with internal energy 100 kJ/kg to state 2 with internal energy 200 kJ/kg.

Which one of the following technologies in IC packaging provides the greater packing densities in circuit board assembly: (A) pin-in-hole technology, (B) surface-mount technology, or (C) through-hole technology

How fast is a 2012 nissan sentra speed and acceleration

Rules that set a minimum standard for the construction.

A multi-plate clutch is to transmit 12 kW at 1500 rev/min. The inner and outer radii for the plates are to be 50 mm and 100 mm respectively. The maximum axial spring force is restricted to lkN.

The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both