Engineering » Page 34

Engineering

One of the best methods for understanding a company's policies and procedures is

Answer Answers (1)

Engineering

As you recall, the Logic Schematic for Lab2&3 ('Smart ECC Transportation 'Bus' with Robotic Arm: 4-Bit Microcomputer) was very complex and difficult because we used Logic Gates. How would an Arduino UNO Board using an 8-Bit Microcontroller improve or simplify the design and testing? Hint: Mention every experience you had in the Lab2&3 and Imagine if you used Arduino instead.

Answer Answers (1)

Brooklyn Gilmore

Engineering

Hot water (cph = 4188 J/kg·K) with a mass flow rate of 2.5 kg/s at 100°C enters a thin-walled concentric tube counterflow heat exchanger with a surface area of 23 m2 and an overall heat transfer coefficient of 1000 W/m2 ·K. Cold water (cpc = 4178 J/kg·K) with a mass flow rate of 5 kg/s enters the heat exchanger at 20°C. Determine

(a) the heat transfer rate for the heat exchanger and

(b) the outlet temperatures of the cold and hot fluids. After a period of operation, the overall heat transfer coefficient is reduced to 500 W/m2 ·K, so determine

(c) the fouling factor that caused the reduction in the overall heat transfer coefficient.

Answer Answers (1)

Engineering

The ratio of absolute viscosity to the density of a substance is known as a) Dynamic viscosity b) coefficient of viscosity c) kinematic viscosity d) none of these

Answer Answers (1)

Engineering

A cylindrical specimen of a hypothetical metal alloy is stressed in compression. If its original and final diameters are 19.636 and 19.661 mm, respectively, and its final length is 75.9 mm, calculate its original length if the deformation is totally elastic. The elastic and shear moduli for this alloy are 108 GPa and 37.1 GPa, respectively.

Answer Answers (1)

Engineering

Block B starts from rest, block A moves with a constant acceleration, and slider block C moves to the right with a constant acceleration of 75 mm/s2. Knowing that at t = 2 s the velocities of B and C are 480 mm/s downward and 280 mm/s to the right, respectively, use kinematics to determine:

a. The acceleration of A and B

b. The initial velocities of A and C

c. The change in positions of slider C after 3 s.

Answer Answers (1)

Engineering

Which statements describe codominance? Select three options. Traits are usually dominant. Traits are neither dominant nor recessive. Offspring exhibit an intermediate form of alleles from the parents. Both alleles, one from each parent, are expressed in offspring. Codominance involves the interaction of two alleles.

Answer Answers (2)

Engineering

Draw your vectors starting at the black dot. The orientation of your vectors will be graded. The exact length of your vectors will not be graded and the trigonometric function arguments are in radians.

Answer Answers (1)

Engineering

The first powered dirigible in the United States used a

engine.

O Bell

O Curtiss

O Lahm

O Wright

Answer Answers (1)

Engineering

Determine the enthalpy, volume and density of 1.0 kg of steam at a pressure of 0.5 MN/m2 and with a dryness fraction of 0.96

Answer Answers (1)

Engineering

You are asked to study the causal effect of hours spent on employee training (measured in hours per worker per week) in a manufacturing plant on the productivity of its workers (output per worker per hour). Write in the box the option letter (a, b, c or d) on the right that best describes the statement on the left. Choose a random group of employees to receive ten hours per week in additional training for a period of four weeks. Then, estimate the difference in productivity between workers who received the additional training and those that did not

Answer Answers (1)

Engineering

Identified elements and/or features of a product or system are the

1. Constraints

2. Trade-offs

3. Criteria

4. Efficiency

Answer Answers (1)

Engineering

For a 2 Vpp signal that fits within the ADC's input range, find the SQNR for: a) an 8-bit ADC with an input range of 1V to 6V b) a 9-bit ADC with an input range of 0V to 4V

Answer Answers (1)

Engineering

Redação sobre a Lei da Palmadas

Answer Answers (1)

Carlos Dominguez

Engineering

Michelle is the general manager of a power plant. This morning, she will meet with city officials to discuss environmental issues. After the meeting, she will confer with the plant's section managers to address the concerns of the city representatives. This afternoon, Michelle will meet with a team leader to go over a complaint filed by an employee. After the complaint meeting, Michelle plans to spend time in the library and on the Internet researching new technologies that can be used to improve the performance of her plant. Which type of management skill does Michelle use most during the day?

Answer Answers (1)