Ask Question
5 January, 11:38

Air enters the combustor of a jet engine at p1=10 atm, T1=1000°R, and M1=0.2. Fuel is injected and burned, with a fuel/air mass ratio of 0.06. The heat released during combustion is 4.5 x 10^8 ft-lbf per slug of fuel (or 18,000 BTU/lbm).

1. Assuming one-dimensional frictionless flow with γ = 1.4 for the fuel-air mixture, calculate M2, p2, and T2 at the exit of the combustor.

+1
Answers (1)
  1. 5 January, 12:08
    0
    M2 = 0.06404

    P2 = 2.273

    T2 = 5806.45°R

    Explanation:

    Given that p1 = 10atm, T1 = 1000R, M1 = 0.2.

    Therefore from Steam Table, Po1 = (1.028) * (10) = 10.28 atm,

    To1 = (1.008) * (1000) = 1008 ºR

    R = 1716 ft-lb/slug-ºR cp = 6006 ft-lb/slug-ºR fuel-air ratio (by mass)

    F/A = ? = FA slugf/slugaq = 4.5 x 108ft-lb/slugfx FA slugf/sluga = (4.5 x 108) FA ft-lb/sluga

    For the air q = cp (To2 - To1)

    (Exit flow - inlet flow) - choked flow is assumed For M1 = 0.2

    Table A. 3 of steam table gives P/P * = 2.273,

    T/T * = 0.2066,

    To/To * = 0.1736 To * = To2 = To/0.1736 = 1008/0.1736 = 5806.45 ºR Gives q = cp (To * - To) = (6006 ft-lb/sluga-ºR) * (5806.45 - 1008) ºR = 28819500 ft-lb/slugaSetting equal to equation 1 above gives 28819500 ft-lb/sluga = FA * (4.5 x 108) ft-lb/slugaFA =

    F/A = 0.06404 slugf/slugaor less to prevent choked flow at the exit
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Air enters the combustor of a jet engine at p1=10 atm, T1=1000°R, and M1=0.2. Fuel is injected and burned, with a fuel/air mass ratio of ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers