Engineering

29 May, 21:44

You're trying to lift a 298 pound object with a first class lever. You're pushing down on one side of the lever 9ft from the fulcrum, and the object is on the other side 2 ft from the fulcrum. Assuming no friction (balanced moments), how much force do you have to apply to lift the object?

+3

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “You're trying to lift a 298 pound object with a first class lever. You're pushing down on one side of the lever 9ft from the fulcrum, and ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

What are the non-functional requirements of a washing machine

Compared to 15 mph on a dry road, about how much longer will it take for you to stop at 30 mph on a snow-covered road? 2 to 3 times 4 to 6 times 8 to 10 times

Estimate the theoretical fracture strength (in MPa) of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped internal crack of length 0.25 mm that has a tip radius of curvature of 0.

What type of building project is most like an enhanced skills occupation? 1. returning a repurposed structure to its original use 2. building an entirely new structure from the ground up 3.

you are planning to buy a new couch for your family room you measure the available space and conclude that the couch should be between 5" and 6' _ 8" long. at the store you find a couch is 78 inches long.

New Questions in Engineering

The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both