Technician A says that the first step in diagnosing engine condition is to perform a thorough visual inspection. Technician B says that oil leaks can be found by measuring straight up from where the oil drips on the floor. Who is right?
A. Technician A only
B. Technician B only
C. Both technicians A and B
D. Neither technician A nor B
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Technician A says that the first step in diagnosing engine condition is to perform a thorough visual inspection. Technician B says that oil ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Can glasses be formed using metallic materials?
Answers (1)
Blank Complete the following paragraph pertaining to the popular audio file formats. compresses the size of a file, reducing it to around one-twelfth of the original file. blank is widely used in the Apple Macintosh operating system. A. MP3 B. WAV C.
Answers (1)
Who is responsible for conducting a hazard assessment? Select the best option. Employee Employer
Answers (1)
The steel 4140 steel contains 0.4% C, however, it shows higher yield strength and ultimate strength than that of the 1045 (0.45% C explain why)
Answers (1)
Which of the following is the LEAST-Likely cause of tire wear? A) Underinflation B) Braking C) Acceleration D) Tire rotation
Answers (1)
New Questions in Engineering
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.
Answers (1)
Explain two Types of bearing?
Answers (1)
7 Single-use earplugs require a professional fitting before they can be used. A True B) False
Answers (2)
Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.
Answers (1)
When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False
Answers (1)