Name 3 types of hydraulic cylinder mountings.

3. Technician A says that on-board self-diagnostics test mode procedures should be conducted on a cold engine. Technician B says that many diagnostic trouble codes (DTCs) will monitor items only when the engine control system is in closed loop.

a metal coin has certain properties that can be measured. which property of a coin is different on the moon that is on earth?

What gage pressure does a skin diver experience when they dive to 35 ft in the ocean with a water temperature of 55 °F? Report your answer in lbf/in^2.

The concrete canoe team does some analysis on their design and calculates that they need a compressive strength of 860 psi. They test several mix designs and chose one that has a sample mean of 900 psi with a standard error of the mean of 10 psi.

Two gage marks are placed exactly 250 mm apart on a 12-mm-diameter aluminum rod with E 5 73 GPa and an ultimate strength of 140 MPa. Knowing that the distance between the gage marks is 250.

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False