Ask Question
EngineeringEngineering
30 December, 18:49

What are the characteristic features of stress corrosion cracks?

+1
Answers (1)
  1. 30 December, 18:54
    0
    Answer and Explanation:

    The crack formation growth that takes place in an environment corrosive.

    Stress corrosion cracks can be defined as the spontaneous failures of the metal alloy as a result of the combined action of corrosion and high tensile stress.

    Some of the characteristic features of stress corrosion cracks are:

    These occur at high temperatures. Occurrence of failures in metals mechanically. Occurrence of sudden and unexpected failures under tensile stress. The rate of work hardening of the metal alloy is high. Time An environment that is specific for stress corrosion cracking.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “What are the characteristic features of stress corrosion cracks? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Our goal is to design a traffic-light controller with the following properties; it lights up the green light (output G) for 15 seconds, followed by the yellow light (output Y) for 9 seconds, then the red light (output R) for 12 seconds.
Answers (1)
1 Suppose Alice, Bob, and Carol want to use secret key technology to authenticate each other. If they all used the same secret key K, then Bob could impersonate Carol to Alice (actually any of the three can impersonate the other to the third).
Answers (1)
A square isothermal chip is of width w = 5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at T[infinity] = 15°C.
Answers (1)
Why was Copernicus's heliocentric model not believed until Galileo and Kepler provided more evidence? The model had the moon orbiting Earth. The model was against religious teachings. The model could not explain retrograde motion.
Answers (1)
Suppose the measured background level is 5.1 mV. A signal of 20.7 mV is measured at a distance of 29 mm and 15.8 mV is measured at 32.5 mm. Correct the data for background and normalize the data to the maximum value.
Answers (1)
New Questions in Engineering
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)
Home » Engineering » What are the characteristic features of stress corrosion cracks?
Sign Up Forgot Password?