Ask Question
EngineeringEngineering
29 June, 20:07

Which of following unit cell has the smallest atomic packing factor? (a) BCC unit cell (b) FCC unit cell (c) SC unit cell (d) HCP unit cell

+5
Answers (1)
  1. 29 June, 20:13
    0
    (c) SC unit cell

    Explanation:

    BCC (Body centered cubic) : In this one atom is present at center of the cell and one at each corner the packing factor of the BCC is 68% FCC (Face centered cubic) : In this one atom is present at the each faces and one at each corner the packing factor of FCC is 74 % SC (Simple cubic) : In this the atoms are present only at corner its packing factor is 52.4 % HCP (Hexagonal closed pack) its packing factor is 74.04 %

    So from above discussion it is clear that simple cubic has smallest packing factor
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Which of following unit cell has the smallest atomic packing factor? (a) BCC unit cell (b) FCC unit cell (c) SC unit cell (d) HCP unit cell ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
The Poisson ratio can be measured in standardised experimental tests. a) True b) False
Answers (1)
Chapter 15 - Fasteners: Determine the tensile load capacity of a 5/16 - 18 UNC thread and a 5/16 - 24 UNF thread made of the same material. Which is stronger? Make the same comparison for M8 x 1.25 and M8 x 1 ISO threads.
Answers (2)
Determine the time required for the center temperature of a 3 cube to reach 808C. The cube has a volume of 125 cm. The thermal conductivity of the material is 0.4 W / (m 8C); density is 950 kg/m3; and specific heat is 3.4 kJ / (kg K).
Answers (1)
There are two questions about SolidWorks. 1. Why is it good practice to fully define sketchgeometry? 2. Describe what happens if you do not select a planeprior to clicking on the Sketch icon when creating a sketch.
Answers (1)
What is a good reason to keep a project's file size small? A. The file will take longer to export. B. The objects in your project will be organized better. C. It takes less time to send the file in an e-mail message. D.
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
Home » Engineering » Which of following unit cell has the smallest atomic packing factor? (a) BCC unit cell (b) FCC unit cell (c) SC unit cell (d) HCP unit cell
Sign Up Forgot Password?