Ask Question
EngineeringEngineering
30 June, 13:05

What is a "gob" as described in the glass making process?

+2
Answers (1)
  1. 30 June, 13:14
    0
    Step1

    Gob is the primary element in the glass production. Gob is the hot molten glass which can shape according to the shape of container.

    Step2

    Gob is filled in the mold in glass production. The shape of gob is different for different glass product in glass production process. So, the shape of gob is very important parameter for glass production. This gob is filled in the mold by guided method or the gravity method.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “What is a "gob" as described in the glass making process? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
g (d) Usually, in the case of two finite-duration signals like in parts (a) and (b), the convolution integralmust be evaluated in 5 different regions: no overlap (on the left side), partial overlap (on the left side), complete overlap, partial
Answers (1)
Air is compressed in the compressor of a turbojet engine. Air enters the compressor at 270 K and 58 kPa and exits the compressor at 465 K and 350 kPa. Take the average specific heat at constant pressure (cp, avg) of air as 1.015 kJ / kg.
Answers (1)
A (n) 78-hp compressor in a facility that operates at full load for 2500 h a year is powered by an electric motor that has an efficiency of 93 percent. If the unit cost of electricity is $0.
Answers (1)
16.1 (a) Briefly explain the difference between oxidation and reduction electrochemical reactions. (b) Which reaction occurs at the anode and which at the cathode?
Answers (1)
Find the total amount of heat in Q lost through a wall 10' by 18', with R value from q. 1. Inside temperature is 70 degrees F while outside is 45 degrees F
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
Home » Engineering » What is a "gob" as described in the glass making process?
Sign Up Forgot Password?