Ask Question
EngineeringEngineering
11 December, 18:59

Rod is fixed at and perfectly bonded to rod at, as illustrated below. Rod has length, diameter and is made of a material with shear modulus. Rod has length, diameter and is made of a material with shear modulus. A torque is applied at and a torque is applied at. Matlab Mathematica Python L1

+4
Answers (1)
  1. 11 December, 19:12
    0
    Rod has length, diameter and is made of a material with shear modulus. Matlab Mathematica Python L1 is given below.

    Explanation:

    Rod (1) is fixed at A and perfectly bonded to rod (2) at B, as illustrated below.

    Rod (1) has length L1 = 343 mm, diameter dı = 70 mm and is made of a material with shear modulus G1 = 43 GPa.

    Rod (2) has length L2 = 391 mm, diameter d2 = 41 mm and is made of a material with shear modulus G2 = 33 GPa.

    A torque TB = 777 N. m is applied at B and a torque Tc = 767 N. m is applied at C. (1) Est (2)

    Matlab Mathematica Python

    L1 = 343; % mm

    L2 = 391; % mm

    d1 = 70; % mm

    d2 = 41; % mm

    G1 = 43; % GPS

    G2 = 33; % GPa

    TB = 777; % N. m

    TC = 767; % N. m

    Determine the magnitude of the angle of twist at end C, i. e., °C. c = number (rtol=0.01, atol=1e-05) rad rad o
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Rod is fixed at and perfectly bonded to rod at, as illustrated below. Rod has length, diameter and is made of a material with shear ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Matt wants to purify water using radiation. Which technique should he use?
Answers (1)
Which of carbon will have higher strength but less ductility, 0.49% or 0.19%
Answers (1)
An insulated steady-flow mixing chamber has two inlets and 1 outlet. At inlet 1, the mass flow rate is 0.08 kg/s. At inlet 2, the mass flow rate is 0.15 kg/s. The average velocity at the outlet is 12.84 m/s. The area of the outlet is 0.01 m2.
Answers (1)
Carbon resistors often come as a brown cylinder with colored bands. These colored bands can be read to determine the manufacturer's target resistance value. The first two bands (L and M) represent the number.
Answers (1)
1. How many pieces of 12-1/2" long wood can be cut from a piece of wood that is 39-3/4" long? * o A. 2 o B. 3 o C. 6 OD. 7
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Home » Engineering » Rod is fixed at and perfectly bonded to rod at, as illustrated below. Rod has length, diameter and is made of a material with shear modulus. Rod has length, diameter and is made of a material with shear modulus.
Sign Up Forgot Password?