Technician A says that the micrometer operates on a simple principle: The spindle has 20 threads per inch, so one revolution of the thimble will advance or retract the spindle 1/20 of an inch. Technician B says that spindle has 50 threads per inch, so one revolution of the thimble will advance or retract the spindle 1/50 of an inch. Who is correct
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Technician A says that the micrometer operates on a simple principle: The spindle has 20 threads per inch, so one revolution of the thimble ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
The velocity of a particle along the s-axis is given by v=5s^ (3/2), where s is in mm and v is in mm/s. If the particle starts from rest, determine the acceleration when s is 2 mm. Express answer in mm/s^2
Answers (1)
Superheated steam at 40 bar absolute and 500°C flows at a rate of 250 kg/min to an adiabatic turbine, where it expands to 5 bar. The turbine develops 1500 kW.
Answers (1)
Care should be exercised when grinding and measuring the following on the Acme threading tool. Which is correct? A. Back rake, thread angle, and relief angles B. End flat width, relief angle, and thread angle C.
Answers (1)
20x/cdot 90+83375-473=1234961567890
Answers (1)
A student team is to design a human-powered submarine for a design competition. The overall length of the prototype submarine is 4.85 m, and its student designers hope that it can travel fully submerged through water at 0.440 m/s.
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)