Technician A says that the mainline pressure is usually higher in manual first gear than it is when the gear selector is in the drive position. Technician B says that mainline pressure is higher in reverse than when the gear selector is in the drive position.
Which technician is correct?
Answers (2)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Technician A says that the mainline pressure is usually higher in manual first gear than it is when the gear selector is in the drive ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
If you are using your highbeams at night you should remember to do what?
Answers (2)
A sludge pump pumps at a rate of 40 GPM. The raw sludge density is 4.5 percent solids. How many minutes per hour should the pump operate if the inflow to the clarifier is 1.
Answers (1)
A convergentâdivergent nozzle has an exit area to throat area ratio of 4. It is supplied with air from a large reservoir in which the pressure is kept at 500 kPa and it discharges into another large reservoir in which the pressure is kept at 10 kPa.
Answers (1)
What is the color of an original apple
Answers (1)
Which of the following material properties varies with temperature? a) - density b) - viscosity c) - electrical resistance d) - all of the above
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)