A liquid refrigerant (sg=1,2) is flowing at a weight flow rate of 20,9 N/h. Refrigerant flashes into a vapor and its specific weight become 11,5 N/m^3. If the weigt flow rate remains at 20,9 N/h, compute the volume flow rate[10^-4 m^3/sec]. Express results in 10^-4 m^3/sec.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “A liquid refrigerant (sg=1,2) is flowing at a weight flow rate of 20,9 N/h. Refrigerant flashes into a vapor and its specific weight become ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
The uniform wall thickness that is usually targeted for plastic injection molded parts is roughly: A. 0.5 mm B. 3 mm C. 7 mm D. 12 + mm
Answers (1)
Many companies are combining their online business activities with an existing physical presence. In about 100 words, explain which elements they are combining and what problems they are solving by doing so.
Answers (1)
What instrument is used to measure temperature?
Answers (1)
Water at 20◦C is pumped through 1000 ft of 0.425 ft diameter pipe at a volumetric flowrate of 1 ft3/s through a cast iron pipe that connects to connects two reservoirs. The elevation difference between the two reserviors is 120 ft.
Answers (1)
What will be displayed if code corresponding to the following pseudocode is executed? Set Number = 4 Repeat Write 2 * Number Set Number = Number + 2 Until Number = 8 a. 8 b. 4 c. 8 d. 12 12 8 12 16 16 12
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)