Ask Question
EngineeringEngineering
28 September, 10:45

What are the purposes of the various types of drawings used for the design and erection of steel framed buildings?

+2
Answers (1)
  1. 28 September, 11:05
    0
    The main purpose the various types of drawing used for the design and erection of steel framed buildings is to successfully construct a solid and strong building

    Explanation:

    The main purpose the various types of drawing used for the design and erection of steel framed buildings is to successfully construct a solid and strong buildings.

    Steel forms the skeleton of a building, essentially the part of the building that holds everything up and together. Steel has so many advantages when compared to other structural building material such as concrete, plastic, timber and composite materials.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “What are the purposes of the various types of drawings used for the design and erection of steel framed buildings? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Nickel superalloys are selected for high-temperature gas turbine blades because of: a) High modulus. b) High creep strength. c) High maximum working temperature. d) b and c.
Answers (1)
When changing a tire size 195/75 R15 to a 5 percent lower profile, the correct tire size would be
Answers (1)
What kind of datatype is being input for Number1, Number2, Number3? Number1=input ("Enter Number1 = ") Number2=input ("Enter Number2 = ") Number3=input ("Enter Number3 = ") Total=
Answers (1)
A 100 ft long steel wire has a cross-sectional area of 0.0144 in. 2. When a force of 270 lb is applied to the wire, its length increases by 0.75 in. Determine: a. The stress (precision of 1000) b. The strain (precision of 0.00000) c.
Answers (1)
A local reaction is when a chemical enters the bloodstream?
Answers (1)
New Questions in Engineering
If a law enforcement officer stops a vehicle for a traffic violation and finds a front-seat passenger 18 years of age or older not wearing a safety belt, a safety belt violation will be charged to: The front-seat passenger Neither the driver nor the
Answers (1)
The input power for a thermostat is wired to the A. R b. G c. W d. Y
Answers (1)
What standard feature is on all circular saws? 1. Blade guard 2. Blade-height adjustment 3. Angle-of-cut adjustment 4. All of the above
Answers (1)
Write a program that prints, line by line, the numbers from 1 to 100. For multiples of three print the word "Cow" instead of the number and for the multiples of seven print "Pie" instead of the number.
Answers (1)
Always refill your gas tank well before A. You reach your destination B. Your indicator light goes on C. Your fuel gauge reaches half empty D. Your fuel gauge reaches one-quarter full
Answers (1)
Home » Engineering » What are the purposes of the various types of drawings used for the design and erection of steel framed buildings?
Sign Up Forgot Password?