Sign In
Ask Question
Yadira Cisneros
Engineering
21 January, 14:06
What are the characteristics of Polyamide?
+1
Answers (
1
)
Johnny Doyle
21 January, 14:25
0
The two most important polyamides are poly (hexamethylene adipamide) (Nylon 6,6) and polycaprolactam (Nylon 6). Both have excellent mechanical properties including high tensile strength, high flexibility, good resilience, low creep and high impact strength (toughness).
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“What are the characteristics of Polyamide? ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Which component stores energy as potential energy in a mechanical system?
Answers (1)
A 1-m diameter penstock is 10-km long and carries water to an impulse turbine. If the turbine/generator is 83 percent efficient, what power can be extracted if the elevation difference between the reservoir and the nozzle is 650 m.
Answers (1)
A horizontal opaque flat plate is well insulated on the edges and the lower surface. The top surface has an area of 8 m2 and it experiences uniform irradiation at a rate of 6000 W.
Answers (1)
Format of a letter
Answers (1)
Prompt the user to enter five numbers, being five people's weights. Store the numbers in an array of doubles. Output the array's numbers on one line, each number followed by one space. (2 pts) Ex:Enter weight 1:236.0Enter weight 2:89.
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
Home
»
Engineering
» What are the characteristics of Polyamide?
Sign In
Sign Up
Forgot Password?