Suppose you have two boxes in front of you. One box contains a Thevenin Equivalent (voltage source in series with a resistor) and the other box contains a Norton Equivalent (current source in parallel with a resistor). Each box has a pair of terminals available for measurement. You cannot open the boxes. You may make any electrical measurements at the terminals. You also have access to the outside surface of the boxes. Can you determine which box contains the Thevenin Equivalent and which box contains the Norton Equivalent? Or is it impossible to determine which circuit in which box? Justify your answer in detail.

Question

Hadassah Huerta

Engineering

12 July, 05:42

Suppose you have two boxes in front of you. One box contains a Thevenin Equivalent (voltage source in series with a resistor) and the other box contains a Norton Equivalent (current source in parallel with a resistor). Each box has a pair of terminals available for measurement. You cannot open the boxes. You may make any electrical measurements at the terminals. You also have access to the outside surface of the boxes. Can you determine which box contains the Thevenin Equivalent and which box contains the Norton Equivalent? Or is it impossible to determine which circuit in which box? Justify your answer in detail.

+1

Answers (1)

Know the Answer?

Isabel Vargas · Answer 1

1. Measure the temperature of the boxes and leave them unconnected.

2. Norton reduces his circuit down to a single resistance in parallel with a constant current source. A real-life Norton equivalent circuit would be continuously wasting power (as heat) as the current source dumps energy into the resistor, even when externally unconnected, while a Thevenin equivalent circuit would sit there doing nothing.

3. The Norton equivalent box would get warm and eventually run out of power. The Thevenin equivalent box would stay at ambient temperature.