Sign In
Ask Question
Kendrick Leon
Engineering
17 April, 05:00
What is referred to as "Pyroelectric" materials?
+4
Answers (
1
)
Page
17 April, 05:22
0
Answer and Explanation:
Pyroelectric material
Pyroelectric materials have special property of generating potential difference (although it is very less) when these material are treated with heat or when celled down.
The potential difference generated is for very less time
The generation of potential difference is due to change in position of atoms after heating or cooling.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“What is referred to as "Pyroelectric" materials? ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
What is the difference between geosynchronous and non-geosynchronous satellites? What are the pros and cons of these two types of satellites?
Answers (1)
A ship tows a submerged cylinder, 1.5 m in diameter and 22 m long, at U = 5 m/s in fresh water at 20°C. Estimate the towing power in kW if the cylinder is (a) parallel, and (b) normal to the tow direction.
Answers (1)
The Hubble space telescope is a bus-sized satellite powered by huge ___ panels
Answers (2)
Electrical pressure or "force" A) current B) resistance C) voltage
Answers (1)
A PV battery system has an end-to-end efficiency of 77%. The system is used to run an all-AC load that is run only at night. The charge controller efficiency is 96% and the inverter efficiency is 85%.
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
Home
»
Engineering
» What is referred to as "Pyroelectric" materials?
Sign In
Sign Up
Forgot Password?