In a fluid power system, if energy is not transferred to work, what form does it take?

A) torque

B) flow

C) mechanical

D) heat

Identify each statement as referring to a series or parallel circuit. 1. Current through each resistor depends on the resistance of the resistor. 2. Total current through the circuit is equal to the sum of the current through each resistor. 3.

What kindnof energy do you display in physical education class?

150 mm wide. Assume the plates are negligibly thin, and that the natural convection air flow adjacent to the plates is not affected by the presence of the neighboring plates.

A soccer ball is sitting still on a flat field. What forces are acting upon it?

List two types of inferred values used to indicate level measurements

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both

What is the definition of diameter pitch?