2. An inductor can be placed in series with a motor to provide
A. braking for the motor.
B. heat reduction in the motor windings.
C. less current feedback to the driver.
D. faster motor response to driver signals.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “2. An inductor can be placed in series with a motor to provide A. braking for the motor. B. heat reduction in the motor windings. C. less ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
The intercept of the CML is the origin while the intercept of the SML is RF CML consists of efficient portfolios, while the SML is concerned with all portfolios or securities CML could be downward sloping while that is impossible for the SML CML and
Answers (1)
Calculate the resulting power factor if a synchronous motor rated at 500 hp with 90% efficiency operating at rated load and at unity power factor is added to the plant instead of the capacitor. Assume constant voltage (1 hp = 0.746 kW).
Answers (1)
The pressure of a car can be adjusted using what
Answers (1)
The velocity of a particle along the s-axis is given by v=5s^ (3/2), where s is in mm and v is in mm/s. If the particle starts from rest, determine the acceleration when s is 2 mm. Express answer in mm/s^2
Answers (1)
According to National Council on Radiation Protection and Measurements (NCRP) regulations, leakage radiation from the x-ray tube at 1 meter must not exceed a. 10 Gya/h. b. 10 mGya/min c. 100 mGya/min d. 1 mGya/h.
Answers (1)
New Questions in Engineering
Payment to beneficiaries who were named by the insured person
Answers (1)
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)