Which of the following impulse responses correspond (s) to stable LTI systems? (a) h1 (t) = e - (1-2j) ru (t) (b) h2 (t) = e-r cos (2t) u (t)

A piston-cylinder device contains 0.1 [kg] of air at a pressure of 100 [kPa] and a temperature of 400 [K] that undergoes an expansion process.

What is A roofed structure that is similar to a porch, but is detached from the house.

An ideal Diesel cycle has a maximum cycle temperature of 2000°C. The state of the air at the beginning of the compression is P1 = 95 kPa and T1 = 15°C.

Two blocks of rubber, each of width w = 60 mm, are bonded to rigid supports and to the movable plate AB. Knowing that a force of magnitude P = 19 kN causes a deflection δ = 3 mm of plate AB, determine the modulus of rigidity of the rubber used.

Problem a) - c) : Use the method of joints, the method of sections, or both to solve the following trusses. Draw F. B. Ds for all your calculations.

List two characteristics of computers.

Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication

According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.

A gas flows through a one-inlet, one-exit control volume operating at steady state. Heat transfer at the rate takes place only at a location on the boundary where the temperature is Tb.

An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.