Ask Question
EngineeringEngineering
26 March, 15:35

The cycle used most frequently for steam power generation is a. Brayton b. Ericsson C. Rankine d. Diesel

+1
Answers (1)
  1. 26 March, 15:46
    0
    C. Rankine cycle

    Explanation:

    Generally Rankine is used for steam power plant. It gives the suitable work put. There are lots of limitations in Ericsson, Brayton and diesel cycle that is why we are using Rankine cycle for steam production. In Rankine cycle steam produces in the steam boiler and then allow to pass through steam turbine in which we obtain certain amount work after turbine this steam become wet steam and passes through condenser where heat rejection take place and all wet steam converts in the water then this water is feed to boiler by using feed pump and this cycle works to produce power out put in steam turbine.

    Brayton cycle is used in gas turbine. We know that gas turbine is used in flights. And to increase the efficiency of Brayton cycle, Ericssion cycle is used. Diesel cycle is used in heavy vehicle.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “The cycle used most frequently for steam power generation is a. Brayton b. Ericsson C. Rankine d. Diesel ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
A room contains 50 kg of dry air and 06 kg of water vapor at 25°C and 95 kPa total pressure. The saturation p ressure of water at 25 "C is 3.1698 kPa.
Answers (1)
A series RC circuit contains two resistors and two capacitors. The resistors are 39 Ω and 68 Ω. The capacitors have capacitive reactances of 60 Ω and 50 Ω. The applied voltage is 240 V.
Answers (1)
Compute the longitudinal modulus of elasticity (in GPa) for a continuous and aligned hybrid composite consisting of aramid and glass fibers in volume fractions of 0.22 and 0.
Answers (1)
Your department's laser printer recently began printing a vertical black line near the edge of every printed page. What should you do to resolve the problem?
Answers (1)
If a tank can be pressurized to a maximum of 500 lb/in2 (psi), and the area is 20 in2. What is the most force that should be exerted by the system? A) 25 lbs B) 10,000 lbs C) 250 lbs D) 1000 lbs
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Home » Engineering » The cycle used most frequently for steam power generation is a. Brayton b. Ericsson C. Rankine d. Diesel
Sign Up Forgot Password?