Ask Question
EngineeringEngineering
31 August, 21:37

Describe the anodising process, with diagrams.

+3
Answers (1)
  1. 31 August, 21:43
    0
    Anodising process is method to protect the metal surface from corrosion. The metal surface get corroded due to presence of oxygen and due this the material loose strength.

    Anodising process is also used to provide good appearance of metals. This is also called electroplating coating.

    In this process metal dipped in the acidic electrolyte and pass the current, due which oxidation takes place and produce a layer on the metal surface.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Describe the anodising process, with diagrams. ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
In a household, a business is run for an average of 6 hours per day. The total power consumed by a computer and its printer is 245 watts. In addition, a 55-W light bulb runs during the same 6 hours. If their utility charges 11.
Answers (1)
This color curb is where parking is permitted for a limited time. The time constraints for that park will either be painted on the curb or on a sign next to the curb. Green Yellow Red White
Answers (2)
The rotor in a shaded pole motor consists of A coils energized by alternating current B a short circuited loop of copper wire c a permanent magnet D an iron cylinder
Answers (1)
why is the thermal conductivity of super insolation order of magnitude lower than the thermal conductivity of ordinary insulation?
Answers (1)
A metal bar has a 0.6 in. x 0.6 in. cross section and a gauge length of 2 in. The bar is loaded with a tensile force of 50,000 lb. Under this force, the bar elastically deforms so that the gauge length increases to 2.007 in.
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Home » Engineering » Describe the anodising process, with diagrams.
Sign Up Forgot Password?