What are the main causes of injuries when using forklifts?

Select the 4 answer options that apply.

Overturns

Collisions with other forklifts

Striking pedestrians

Being crushed by a forklift

Falling from a forklift

A sludge pump pumps at a rate of 40 GPM. The raw sludge density is 4.5 percent solids. How many minutes per hour should the pump operate if the inflow to the clarifier is 1.

A vertical curve is designed for 55 mi h and has an intial grade of + 2.5

A hydraulic cylinder has a 125-mm diameter piston with hydraulic fluid inside the cylinder and an ambient pressure of 1 bar. Assuming standard gravity, find the piston mass that will create a pressure inside of 2500 kPa.

What might be a reason you would attend a community collage

Steel balls 10 mm in diameter are annealed by heating to 1150 K and then slowly cooling to 450 K in an air environment for which T[infinity] = 325 K and h = 25 W/m2 ·K.

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False