Engineering » Page 6

Josie Stephenson

Engineering

There is no difference in boring and drilling. a) - True b) - False

Answer Answers (1)

Engineering

A two-dimensional reducing bend has a linear velocity profile at section (1). The flow is uniform at sections (2) and (3). The fluid is incompressible and the flow is steady. Find the maximum velocity, V1, max, at section (1).

Answer Answers (1)

Engineering

An example of Ferrous alloy is Brass a) - True b) - False

Answer Answers (1)

Engineering

Which statement is true? A spontaneous abortion is the same as an induced abortion. The case of Roe v. Wade legalized abortion in all three trimesters. The AMA adopted an anti-abortion position in 1959.

Answer Answers (1)

Engineering

Do you think that aliens exist?

Answer Answers (2)

Engineering

If there is no gap in traffic as you are attempting to enter the expressway, you must

a. cause other drivers to yield to you.

b. stop on the median and wait for a gap.

enter the expressway at a slow speed.

d. slow or stop before entering the acceleration lane or expressway.

Answer Answers (2)

Engineering

What causes a boat to float? My questions are super easy. So you can follow me if you like easy question.

Answer Answers (2)

Engineering

To increase fault-tolerance, the security administrator for Corp has installed an active/passive firewall cluster where the second firewall is held in reserve in case of primary firewall failure. Stateful firewall inspection is being used in the firewall implementation. There have been numerous reports of dropped connections with external clients. Which of the following is MOST likely the cause of this problem?

(A) All packets are traversing the passive firewall causing the connections to be dropped.

(B) The heartbeat between the firewalls is not enabled.

(C) Inbound packets are traversing the active firewall and return traffic is being sent through the passive firewall.

(D) All packets are traversing the active firewall causing the connections to be dropped.

Answer Answers (1)

Engineering

A feeder is supplying a 125-ampere, 240-volt panelboard in a multifamily dwelling. The conductors will be THHN aluminum conductors and all terminations will be rated 75C (167F). What is the minimum size aluminum equipment grounding conductor required?

Answer Answers (1)

Engineering

What three actions consume traction? Why is it wise to never exceed traction capability?

Answer Answers (1)

Engineering

An unknown immiscible liquid seeps into the bottom of an open oil tank. Some measurements indicate that the depth of the unknown liquid is 1.5 m and the depth of the oil (specific weight = 8.5 kN/m3) floating on top is 5.0 m. A pressure gage connected to the bottom of the tank reads 65 kPa. What is the specific gravity of the unknown liquid?

Answer Answers (1)

Engineering

What is the major difference between a disk clog and a disc harrow?

Answer Answers (1)

Engineering

You are designing a system for a real-time application in which specific deadlines must be met. Finishing the computation faster gains nothing. You find that your system can execute the necessary code, in the worst case, twice as fast as necessary. How much energy do you save if you execute at the current speed and turn off the system when the computation is complete and how much energy do you save if you set the voltage and frequency to be half as much?

Answer Answers (1)

Engineering

Measures the power output of the machine

Answer Answers (1)

Engineering

What is an isochoric process? b) Can heat be exchanged in an isochoric process? c) A 100L container holding an ideal gas at an initial pressure of 10MPa is raised to a pressure of 15MPa. How much work is done?

Answer Answers (1)