Use the debug ip rip command on r2 to determine the routes received in the rip updates from r3 and list them here.

Question

Lizzy

Mathematics

3 November, 17:09

Use the debug ip rip command on r2 to determine the routes received in the rip updates from r3 and list them here.

+3

Answers (1)

Know the Answer?

Gideon Benton · Answer 1

10.0.0.0/8 is variably subnetted, 3 subnets, 2 masksC10.1.1.0/30 is directly connected, Serial0/0/0L10.1.1.1/32 is directly connected, Serial0/0/0R10.2.2.0/30 [120/1] via 10.1.1.2, 00:00:21, Serial0/0/0172.30.0.0/16 is variably subnetted, 2 subnets, 2 masksC172.30.10.0/24 is directly connected, GigabitEthernet0/1L172.30.10.1/32 is directly connected, GigabitEthernet0/1R3 only displays its own subnets for the 172.30.0.0 network. R3 does not have any routes for the172.30.0.0 subnets on R1.