Ask Question
9 October, 06:55

Your employer asks you to build a 24-cm long solenoid with an interior field of 4.6 mT. The specifications call for a single layer of wire, wound with the coils as close together as possible. You have two spools of wire available. Wire with a #18 gauge has a diameter of 1.02 mm and has a maximum current rating of 6 A. Wire with a #26 gauge is 0.41 mm in diameter and can carry up to 1 A.

a. Which wire should you use?

b. What current will you need?

+3
Answers (1)
  1. 9 October, 07:05
    0
    Formula for magnetic field in a solenoid

    B = μ₀ N / L x I

    N is total number of turns, L is length of solenoid, I is current, B is magnetic field, μ₀ is constant equal to 4π x 10⁻⁷

    Putting the values for 18 gauge wire

    N = length of wire / diameter of wire

    N = 24 /.102

    = 235.3

    B = μ₀ N / L x I

    4.6 x 10⁻³ = 4π x 10⁻⁷ x (235.3 /.24) x I

    I = 3.735 A

    Putting the values for 26 gauge wire

    N = length of wire / diameter of wire

    N = 24 /.041

    = 585.36

    B = μ₀ N / L x I

    4.6 x 10⁻³ = 4π x 10⁻⁷ x (585.36 /.24) x I

    I = 1.5 A

    a) So 18 gauge wire will be used

    b) as current required in this case is

    3.735 A

    In the second case current required is 1.5 A which is beyond its tolerence limit.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Your employer asks you to build a 24-cm long solenoid with an interior field of 4.6 mT. The specifications call for a single layer of wire, ...” in 📗 Physics if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers