If 230 VDC is applied to a motor with a resistance of 10 ohms, how much current would be drawn?

Determine the mass of a car that weight 3,500 lbs both in slugs and kilograms. The answer should be in kilograms.

Consider a resistor made of pure silicon with a cross-sectional area pf 0.5 μm2, and a length of 50 μm. What is the resistance of this silicon piece? For an applied voltage of 5 V, how much current would flow though it?

What is clearance? What is backlash? What is interference? Explain briefly.

A laboratory furnace wall is constructed of 0.2 m thick fireclay brick having a thermal conductivity of 1.82 W/m-K. The wall is covered on the outer surface with insulation of thermal conductivity of 0.095 W/m-K.

A signal is band-limited between 2 kHz and 2.1 kHz. If the signal is sampled at 1750 Hz, the baseband signal will lie between? a. 00 and 650 Hzb. 750 and 2000 Hzc. 100 and 110 Hzd. 250 and 350 Hz

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.

Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers