Engineering » Page 12

Engineering

A wooden cylinder (0 02 x 0 02 x 0 1m) floats vertically in water with one-third of ts length immersed. a) - Determine the density of wood b) - Determine if this is a stable condition c) - Determine if the plece of wood would float stably in alcohol with density 700 kg/m3

Answer Answers (1)

Engineering

Equivalent production units are generally determined for a. direct materials only b. direct materials and conversion costs c. direct materials and direct labor costs d. conversion costs only

Answer Answers (1)

Engineering

Befor operating any plant, machinery or equipment, you should

Answer Answers (2)

Engineering

piston cylinder has 5kg water at 500kPa and 300c. Heated by 100V and 4A that operates for 500 secs. It's cooled to a saturated liquid. what is the boundary work and heat lost?

Answer Answers (1)

Engineering

Which statement is true of hydraulic tools? Hydraulic tools: a. Are powered by gasoline. b. Can cause electric shock. c. Use fire resistant fluid. d. Work like a loaded gun.

Answer Answers (2)

Engineering

03-05 / Fig (3) Shows T-Section of dimension 10x10x2cm

10 cm

2 cm

10 cm

2 cm

A: Find the location of center of gravity (N. A) of the given T-Section

Answer Answers (1)

Engineering

A piston-cylinder assembly contains 5 kg of air, initially at 2.0 bar, 30 C. The air undergoes a process to a state where the pressure is 2 bar, during which the pressure-volume relationship is pV1.5 = constant. Assume ideal gas behavior for the air. Determine the work and heat transfer, in kJ. Note molar mass of air is 28.96 g/mole

Answer Answers (1)

Engineering

Who is responsible for making sure that PPE fits each worker properly?

A) employee

B) employer

Answer Answers (2)

Engineering

This method will sell the seat in row i and column j unless it is already sold. A ticket is sold if the price of that seat in the array is 0. If the ticket is not sold, add the price of the seat in row i and column j to the totalSales and then set the price of that seat to 0 to designate it has been sold and return true since a sell was made. If the ticket was already sold, then return false.

Answer Answers (1)

Engineering

A low-temperature physicist wishes to publish his experimental result that the heat capacity of a nonmagnetic dielectric material between 0.05K and 0.5K varies as

A√ T + BT^3

As editor of the journaL should you accept the paper for publication?

Answer Answers (1)

Engineering

Consider an electric motor with a shaft power output of 20 kW and an efficiency of 88 percent. Determine the rate at which the motor dissipates heat to the room it is in when the motor operates at full load. In winter, this room is normally heated by a 2-kW resistance heater. Determine if it is necessary to turn the heater on when the motor runs at full load. (Page 96).

Answer Answers (1)

Engineering

List and describe the four major parts of a starting system

Answer Answers (1)

Engineering

Consider a single crystal oriented such that the slip direction and normal to the slip plane are at angles 42.7° and 48.3°, respectively, with the tensile axis. If the critical resolved shear stress is 24.7 MPa, what applied stress (in MPa) will be necessary to cause the single crystal to yield? Enter your answer in accordance to the question statement MPa

Answer Answers (1)

Engineering

According to kirk, What are the main problems that the central artery project is trying to solve?

Answer Answers (1)

Engineering

melinda is using a rectangular brass bar in a sculpture she is creating. the brass bar has a length that is 4 more than 3 times its width if the area of the rectangular brass bar is 480 inches what are the dimensions answer

Answer Answers (2)